And almost 6 months since the outbreak of Covid-19; it has claimed more than 400,000 lives and infected more than 8million people. It has put every human being on Earth on a course to change our way of living; never will we be the same again. The COVID-19 pandemic has left us with an unpredictable and fluid situation ahead. We are entrenched in a new perspective in how we are looking at our transportation mode.

The typical family car interior has a volume of about 100 cubic feet, a 10th the size of a bedroom. And we might cram four, or sometimes five, people into that small space. It’s impossible to social distance.

A simple scenario: riding in car for 72 minutes with an infected passenger who seems fine other than coughing every few minutes. [credits to https://www.usatoday.com/story/opinion/2020/04/22/coronavirus-car-protect-yourself-column/5166146002/]

When the windows are closed, SARS-CoV-2 (in fine aerosol particles) accumulates in the car cabin. With each new cough, the concentration builds up with no significant dilution happening.

While the extreme scenario of ditching our private transport is unlikely, but it is probable that the “new normal” will include a shift towards more concern about personal hygiene and in-depth cleanliness for our car.

Specifically, three factors will influence the future of car ownership — and many other industries, too.

Increase of Car Ownership

Non-car owners have a higher intention to acquire new cars, due to a lack of trust in public transportation. We believe we may see, a wave to buy a private car to avoid taking public transport. More families would acknowledge the potential hazard and would consider taking possession of a family size sedan that would fit their budget and lifestyle.

Surge in Contactless Delivery

Another side effect of the COVID-19 lockdowns is an acceleration of the trend towards contactless communication because of social distancing and the closure of physical retail premises.

This trend will persist as employees continue to work from home and less family trips are being planned. Many drivers would be concerned about potential cross contamination and is likely to minimize human contact – the challenge for our business is the provision of contactless delivery while maintaining the human touch.

Increased Awareness of Interior Cabin Sanitization

The knee jerk effect during the initial phase was a surge in cabin sanitization services. However, we are indeed at war now against an invisible and persistent enemy that will continue to plague us until an effective vaccine is developed and globally distributed.  This is the time for drivers to make structural changes in their cleaning schedule because the world has fundamentally changed and there is no turning back.

The demand of a more efficient and tested methods for sanitization would rise; EA Detailer has partnered with ERST [https://www.erst-project.de/] – a German company which specialize in the production and development of surface coatings with a functional long-term effect, cleaning and disinfecting products

We offer solutions to the causes of prevailing problems that have a long-term effect and thus provide the user of our services with a smooth daily practice. In our company, we fulfill these tasks together as one unit in order to address the associated challenges and constant changes in a coordinated manner. We actively determine the future through personal commitment and the individual performance of each and every employee, thus sustainably bringing real value to our customers.

The post 3 Behavioral Trends that will Reshape Our Driving Habits appeared first on Next powered by EA Detailer.

The Covid-19 crisis has upended auto detailing current modus, and we don’t think they will ever be the same again. It is pertinent that we adapt our business strategies and invest in new digital sales tools as consumers’ demand more online and personalized services.

For digital, this whole disruptive period with corona is an inflection point from which there’s no turning back. What that means for consumers is being able to choose how much or how little of the process they want to conduct online. That includes scheduling an appointment or delivery of a vehicle to appraising the paintwork.

More importantly, it should result in less, if any, time waiting at workshop and flexible options such as having the vehicle picked up or delivered – It’s a more flexible process that doesn’t have to be conducted during traditional business hours.

The coronavirus pandemic has been an accelerant to online sales for the industry, which has been reluctant to adopt such processes due to fear of disrupting their profitable physical operations.

The Anticipated Changes

That doesn’t mean physical workshop won’t be needed going forward. It’ll just be different, including new sanitization processes and a larger combination of online and in-person sales.

The bar has now been raised for any company that wants to perform in this marketplace. We will need first-class digital capability, a safe environment for our customers and a safe environment for our associates. – That is the Holy Grail going forward

We believe the majority of our customers want to visit our showrooms and witness their vehicles being treated. But in many cases, they will do the majority of their shopping online, they may even narrow down the exact service they want prior to coming to the store, but they want to set an appointment, drop the vehicle and make sure they like it.

About 15% of EA Detailer’s sales include delivering vehicles to a customer’s home. And this will evolve over time, more people will take advantage of this.

Online Engagement

We expect the coronavirus will have a long-lasting impact on our industry and consumer purchasing behaviour, particularly online processes.

Most of the customers have been comfortable with it in other parts of their lives, but in auto detailing they haven’t been as comfortable with it, as times goes by they will certainly be more comfortable with it today.

Our focus is on providing a process that “moves customers seamlessly between the online world and offline world.”

This pandemic has propelled our entire company into the digital space. And while online sales aren’t completely supplementing the loss of traditional sales due to the coronavirus pandemic. But we believe the traditional model may be fading or diminishing. Floor traffic won’t go away 100%, but online is just an easier process for everybody involved.

Online Engagement

After three months of hard work and dedication, we are delighted to officially announce the launch on 15^th June 2020. We wanted to make the new website faster, easier to navigate, and more user-friendly.

As a market leader, it’s important for us to make information regarding our thought leadership, services and trends easily accessible for our current and prospective clients. We endeavour to provide our client with the most accurate, up-to-date information and share our knowledge and expertise in the field of auto detailing.

Our goal with this new website is to provide our visitors an easier way to learn about EA Detailer’s services and to browse information based on their own choice. The new website gives better access to How We Work, Case Studies, Expertise & Services, Blog and a more direct manner in communicating with us.

The post The Pandemic has Upended Auto Detailing and It Will Never Be The Same appeared first on Next powered by EA Detailer.

Well, it is time for a formal introduction:

Car Buyer, meet Car-Protection.

And here’s what you should know about Automotive Paint Protection Film.

WHAT PAINT PROTECTION FILM DOES FOR YOUR CAR

Automotive Protective Films go by many different names: Clear Bra, Clear Mask, Invisible Shield, Clear Wrap, Rock Chip Protection, Car Scratch Protective Film, etc. The most common terms for car protective films are simply Paint Protection Film and Clear Bra.

Car Paint Protection Film is the most comprehensive form of defence you can establish between your car and those that are able to damage your car’s appearance. Because of the Paint Protection Film’s high impact resistance, its application will protect the paint from chips and scratches caused by rocks and road debris. The urethane film is resistant to corrosion and acidic contaminants, which means that it will create a line of defence from chemical stains and etching caused by bird droppings, bug splatter, mineral deposits and acid rain. It does not oxidize with exposure to the sun, and it will guard the paint from fading caused by UV rays.

The top layer of a quality film is made up of elastomeric polymers that returns to their natural shape after being stretched or disfigured, giving the film a “self-healing” property. That means when light scratches are inflicted in the film, it absorbs the damage and returns to the texture and properties it had before the incident.

With that in mind, applying a quality Protection Film is something you can do today in order to maintain the look and quality of your car’s paint for years to come.

Now, let’s remember, while Paint Protection Film is powerful and its benefits are numerous, it is not a cure-all when it comes to keeping shiny cars shiny. Nothing will make your car bullet proof. There are rocks that can puncture the Film. If bird droppings or bug splatter are allowed to sit on film for a long period of time, it can and will damage the film.

After applying Paint Protection Film, you will still have to maintain your car.

There is no perfect solution for an unending gloss, and that is not what Paint Protection Film promises. Rather, Paint Protection Film promises that after application, when the forces of nature fight against the depth and clarity of your car’s paint, the paint will fight back.

You will add value to your car by protecting it from damage you could not have avoided otherwise. In the words, Paint Protection Film keeps your car looking better for a longer period of time.

THE TECHNOLOGY AND PROPERTIES OF PAINT PROTECTION FILM

If you’re going to wrap something around your fine new vehicle, you’ll want to know what it is exactly. Let’s discuss a little bit more about what’s inside a sheet of Paint Protection Film. The key ingredient is urethane, a powerful and versatile polymer made from carbamate links. As a compound, it has unique attributes: It is lightweight and transparent, similar to plastic.

However, unlike plastic, it is not brittle or susceptible to tears and cracks. It has a high resistance to impact, abrasion, and corrosion. It is also incredibly flexible, and can return to its natural shape after being stretched or disfigured.

The applications of urethane as a polymer are broad, but today we are talking about your car, and for the benefit of your car, urethane serves as a central ingredient in a clear film around 6-8 mils (0.006 – 0.008 inches) thick.

In addition to the central layer made up of urethane (or polyurethane), a quality Paint Protection Film has at least two other layers.

First, the top is lined with clear coat made up of elastomeric polymers. This is the part that enables a good film to heal itself from small scratches. But it does much more. The clear coat on a good film will have a low surface energy, which prevents organic compounds, like bugs or bird droppings, from bonding with the film.

Second, the bottom is lined with an acrylic adhesive that is designed to be:

• Flexible, so that it can be stretched and wrapped around every contour or your vehicle
• Durable, so that the film will not detach over time
• Invisible, so that it will not affect the look of the paint.

DRIVE PROTECTED

So when it comes to keeping your new vehicle looking new, Paint Protection Film is the most comprehensive and longest-lasting solution. If you have additional questions, browse some of our Paint Protection Film blog posts. Fill out our contact form if you have any questions or if you are ready to schedule an appointment.

You’ve now been formally introduced to Paint Protection Film. We hope this is just the beginning of a long and rewarding friendship!

Reach out to us now and experience Paint Protection Film!
– Whatsapp us at https://www.eadetailer.com/speak2us/
– Call in at 6917 8396

The post Getting to know more about Paint Protection Film appeared first on Next powered by EA Detailer.

After being properly applied, Paint Protection Film is invisible to the naked eye and does not inhibit the depth and clarity of your factory paint. But what about over time? If you’ve done some reading around the Internet, you may have encountered individuals documenting defects that have appeared in their Paint Protection Film after a certain amount of time. In particular, some people who have purchased an after-market Paint Protection Film have noted yellowing, blistering, and peeling. For you to make an informed decision, it’s important to know what’s behind each of these de generations and what you’ll need to do to avoid them.

Yellowing

An early complaint against Paint Protection Film was that after time it began turning yellow, which, of course, has a significant impact on the look of a vehicle’s paint, especially for white cars. This complaint was particularly prevalent when Paint Protection Films first started being applied to consumer automobiles. After researching the matter, film manufacturing companies found that the yellowing effect came from the adhesive that was used to bind a film to the body of a car. UV exposure was oxidizing the adhesive, which lead to discoloration.

Upon this discovery, companies began researching alternative adhesives, and began using the acrylic adhesives that are found on most Paint Protection Films today. This newly developed adhesive is UV resistant, and will not oxidize or discolor. This effectively resolved the discoloration concern for Paint Protection Film. Today, if you put a sub-standard film on your car, it may use an inferior adhesive and lead to discoloration. But all quality professional film manufacturers uses a more recently developed adhesive that does not discolour due to UV exposure.

Blistering

A Paint Protection Film is said to “blister” when small air bubbles are found underneath the film. The blistering effect has everything to do with the quality of application. Typically, an air bubble occurs because a contaminant is trapped under the film, creating separation between the body of the vehicle and the Paint Protection Film.

Overtime this can lead to growing bubbles under the film. A proper application process includes hairsplitting attention to the vehicle’s surface before any film touches paint. This includes washing, claying, and polishing. Moreover, a professional application center creates a controlled environment where the air can be filtered to remove contaminants that could potentially get trapped underneath the film. Thus, a sub-par film and unprofessional application can lead to blistering. But when a quality film is properly applied by an experienced technician, the risk is at most very minimal.

Peeling

Peeling is, of course, when the edges of a film begin to peel away from the paint. It can result from a sub-standard film or unprofessional application, but it is often the result of improper care. Specifically, if you are using a pressure wash to clean a car with Paint Protection Film, it is important to stay at least 12 inches away from the film, and particularly from any exposed edges. If a pressure washer is directed at the edge of a Paint Protection Film, it can begin lifting the film, which leads to peeling.

In sum, the complaints against Paint Protection Film do arise from real-world situations. However, as we have outlined, these situations have specific causes that can be averted. If you purchase a high quality film (like Xpel, 3M, CrystGard), have it installed at a reputable shop, and properly care for your protected vehicle, then the risk of defects like yellowing, blistering, or peeling are next to none. And if any of those things do occur, you will be covered by a ten year manufacturers warranty.

Summing It Up: Drive Protected

So when it comes to keeping your new vehicle looking new, Paint Protection Film is the most comprehensive and longest-lasting solution.

If you have additional questions, look over our Frequently Asked Questions(Coming soon) or browse some of our Paint Protection Film blog posts.

Reach out to us now and experience Paint Protection Film!
– Whatsapp us at https://www.eadetailer.com/speak2us/
– Call in at 6917 8396

The post Everything you need to know about Paint Protection Film (Part 3 of 3) appeared first on Next powered by EA Detailer.

If you’re going to wrap something around your fine new vehicle, you’ll want to know not only where it came from, but what it is exactly. Let’s talk a little bit more about what’s inside a sheet of Paint Protection Film. The key ingredient is urethane, a powerful and versatile polymer made from carbamate links. As a compound, it has unique attributes: It is lightweight and transparent, like plastic. But unlike plastic it is not brittle or susceptible to tears and cracks. It has a high resistance to impact, abrasion, and corrosion. It is also incredibly flexible, and can return to its natural shape after being stretched or disfigured.

Given the polymer’s diverse and advantageous attributes, it has a wide variety of industrial and recreational applications. Urethane is used in the household caulk with which you line your bathroom tiles, because it seals spaces from moisture and prevents the growth of mildew or fungus. It can also be found coating boats and underwater cables to prevent damage. It is used in various sporting equipment parts, from football pads to surfboard fins. Its strength and resistance to wear and tear makes it an ideal component for manufacturing and mining equipment. As we mentioned earlier, urethane is still used to protect various parts of military and aerospace equipment.

The applications of urethane as a polymer are broad, but today we are talking about your car, and for the benefit of your car, urethane serves as a central ingredient in a clear film around 8 mils (0.008 inches) thick.

In addition to the central layer made up of urethane (or polyurethane), a quality Paint Protection Film has at least two other layers. First, the top is lined with clear coat made up of elastomeric polymers. As we mentioned above, this is the part that enables a good film to heal itself from small scratches. But it does much more. The clear coat on a good film will have a low surface energy, which prevents organic compounds, like bugs or bird droppings, from bonding with the film.

Second, the bottom is lined with an acrylic adhesive that is designed to be flexible, so that it can be stretched and wrapped around every contour or your vehicle; durable, so that the film will not detach over time; and invisible, so that it will not affect the look of the paint.

What is the difference about Paint Protection Films compared to Ceramic Coating?

Paint Protection Films are durable, much clearer, easier to install, have hydrophobic and self-healing top coat at the same time. Hydrophobic coat makes the film stain-resistant. It also is a solution that is of physical material that provides a much higher protection to your car painted body surface.

Using only TPU film, we will be able to control colors and patterns of TPU films using the same technology. Our technologies make our products unique and our films stand out by quality and competitive pricing.

Reach out to us now and experience Paint Protection Film!
– Whatsapp us at https://www.eadetailer.com/speak2us/
– Call in at 6917 8396

The post Everything you need to know about Paint Protection Film (Part 2 of 3) appeared first on Next powered by EA Detailer.

Paint Protection Film, Clear Mask, Invisible Shield, Clear Wrap, Rock Chip Protection, Car Scratch Protective Film, Clear Bra are all the most common terms for car protective films.

Car Paint Protection Film is the most comprehensive form of defense you can establish between your car and all that can damage your car’s appearance. Because of Paint Protection Film’s high impact resistance, its application will protect your paint from chips and scratches caused by rocks and road debris. The urethane film is resistant to corrosion and acidic contaminants, meaning that it creates a line of defense from chemical stains and etching caused by bird droppings, bug splatter, or mineral deposits and acid rain. It does not oxidize with exposure to the sun, and will guard your paint from fading caused by UV rays. The top layer of a quality film is made up of elastomeric polymers that return to their natural shape after being stretched or disfigured, giving the film a “self-healing” property. That means when light scratches are inflicted in the film, it absorbs the damage and returns to the texture and properties it had before the incident.

Where Did Paint Protection Film Come From?

Whenever you’re getting to know someone or something, it’s helpful to get some background information. So how about a little bio on the technology behind Paint Protection Film.

Automotive Paint Protection Film is a transparent, urethane material. Urethane technology was developed during the Vietnam War, when U.S. helicopters were crashing due to damage on the leading edge of rotor blades. The military worked to develop a technology that would be lightweight, but resilient, and could be replaced at the fraction of the cost of replacing an entire rotor blade (or a crashed helicopter for that matter). In the 1970s, the military expanded its use of urethane films to the noses of fighter jets, and because the technology has been so successful and efficient, the technology is extended to a variety of urethane films for military and aerospace purposes to this day.

In the 1980s, NASCAR saw how urethane technology could be beneficial in protecting the front half of race cars. Advertisers pay a lot of money to get their decals plastered on the front of fast cars, and I’m sure they weren’t too keen on those decals getting peppered by rock chips.

During the 1990s, urethane films became available to the general consumer for automotive protection. Since then the technology has been continually refined and improved, and has been enthusiastically welcomed across the automotive industry. Today Paint Protection Films are OEM approved by virtually all automotive manufacturers.

Now, let’s remember, while Paint Protection Film is powerful and its benefits are numerous, it is not a cure-all when it comes to keeping shiny cars shiny. Nothing will make your car bullet proof. There are rocks that can puncture a Paint Protection Film. If bird droppings or bug splatter are allowed to sit on film for a long period of time, it can damage the film.

After applying Paint Protection Film, you will still have to wash your car. There is no one-stop-shop solution to perfect and unending gloss. That’s not what Paint Protection Film promises. Rather, Paint Protection Film promises that after application, when the forces of nature fight against the depth and clarity of your car’s paint, the paint will fight back. You will add value to your car by protecting it from damage you could not have avoided otherwise. In the words we used earlier, Paint Protection Film keeps your car looking better for longer.

Reach out to us now and experience Paint Protection Film!
– Whatsapp us at https://www.eadetailer.com/speak2us/
– Call in at 6917 8396

The post Everything you need to know about Paint Protection Film (Part 1 of 3) appeared first on Next powered by EA Detailer.

The post Is Car Paint Protection Coating Necessary? appeared first on Next powered by EA Detailer.